Questions & Answers for: sharp air conditioner working

Sharp Air Conditioner I have a Sharp window mount air conditioner. It reads "E1" after the power goes out. I've had to go through a certain procedure involving unplugging for a period of time and then

...Sharp AC unit shuts down after about 10 minutes and displays an E1 code. Hoe do I get rid of the code and get the unit working properly? Thanks Use a universal remote (like the one for a TV) to turn ...

...air conditioner normally for another 720 hours, but only if you followed the instructions above EXACTLY. If you doubt the veracity of this information, or it does not work as expected, you can get it ...

...to "Clean Filter" If that doesn't work Call Sharp Toll Free 1-800-237-4277. When prompted push for Air Conditioners. They will help you free of charge. Hope that helped Please Rate Me Thanks ...

...Sharp air conditioner AF-S125FX doesn't work when I plug it in, even though a lamp works in the same outlet and we have had the same air conditioner on the same outlet for years. I push in the reset ...

sharp air conditioner will work for about 15 minutes and then stop and the error/problem code E1 shows up. Do you know what this code means and/or how to correct the problem? Check the outside fan and

...Sharp window unit that keeps shutting off it flashes E-1. what does that mean. How can I make it work? Hi, Here is a tip that gives a further explanation of that E-1 code. The causes of the E-1 code ...

...sharp comfort touch air conditioning 12,000 BTU FS-S125FX-A does not cool any more. It's running but at room temp. Can work the external drive and you see that turns the fan but look at the ...

sharp AY-A249J Split System Air Conditioner not working, the timer light flashes 5 times and the power light does not flash at all, the remote has limited function, it turns the indoor unit on and off

...Sharp portable Air Cleaner part # CV-P10MX that is 7 years old and very dusty inside. How do I remove outer plastic housing from this unit so dust can be cleaned out. It should be clipped on with a ...