What size torx socket do I need to take caliper off? I have a 2001 GMC Sierra 1500 pickup I want to change brake pads and wondered what size torx socket I would need? Thank You. most likely a t50
...size allen key is used to take the four screws out of the bottom of the unit? is it metric? The screws in the bottom are Torx T10, which is a lot smaller than the Torx bits in a typical screwdriver ...
...size torx is needed to remove the front brake caliper on a 2005 dodge durango Hi, It requires a special size that comes as a socket type from the parts store. I believe is is a TORX 45. But, usually ...
Question about iPod nano 5th Generation
...size Torx bit? Trying to determine what size Torx bit is required for the Torx screws used for the case of the Toshiba MK80110GAH. A T4 is too small and a T5 is too big. We are attempting to perform ...
size is it? its a Torx bit? if it is any torx bit kit has that size. its not for security, its for fast , manufacturing. just about every store sells this, hardware or car. http://www.amazon.com/Lisle
Question about 1997 Grand Cherokee
...size are the E-torx on the back side of the hub? I am needing to change the ball joints on my 97 jeep grand cherokee. I need to know what size axle nut is on this as well as the e-torx on the back ...
Question about 2003 XJR 1300
...key to remove rear shock absorbers on yamaha xjr 1300 Good question! I have not had to remove my ohlins as yet and do not know what size the torx key would be. I think it is a torx ...
Question about 2006 E350
...torx size head for removing the rear tail light assembly? I need to remove the four screws that hold on the rear tail lights. What is the torx driver size? Star set T-20 should fit It's actually a ...
Question about DC35 Handheld Vacuum
...size Torx screwdriver do I need to fix a Dyson DC35? There is a clog in the neck part of the vacuum head. There are 4 Torx screws but I don't know what size Torx screwdriver to use. Any help would be ...
Question about XL® Classic Bagged Upright Vacuum
...size torx screw does it use? Fran, If I remember correctly, I believe you need a #20 Torx bit to remove and re-install those screws. You can usually find a kit that has multiple size bits in them at ...
Usually answered in minutes!
4,236 Questions
3,747 Questions
3,350 Questions
3,279 Questions
3,218 Questions
