Keurig rep did also mention that the heating elements are sensitive to hard well water, which I have. They have seen issues where hard water requires you perform more frequent de-scaling of the brewer
...keurig and repositioned the switch directly behind the magnetic float. For some strange reason it's about 3/8 inch offset. No joy, the reed switch was still ...
can lift the lid over the k-cup and put it down, push the button and it will work. Help? You have a short , or bad connection in the lid switch. Probally cheeper to buy a new coffee pot than fit it???
..."add water" Keurig Model B50 says "add water" with the full reservior. Any advice appreciated. Thanks, C.J. Miller The level switch is probably bad. If you need repairs, contact ...
switch to trip causing my machine to cut off and me having to hit the re-set button on it. i tried using a different outlet on the other side of the counter, but still did the same thing. do i need to
...switch or fuse, you can try contacting Keurig directly and see if they will honor the warranty, if that doesnt work i know of this great website that sells all kinds of keurig products for very ...
switch or you can try contacting Keurig directly and see if they will honor the warranty, if that doesnt work i know of this great website that sells all kinds of keurig products for very cheap.http:/
...switch (white round ceramic device on the left side of the vessel) to the computer board on the right side (had to remove the cover over the computer board). The blue wire was crimped into a sleeve ...
...Keurig back in and turn it on using the switch in the back of the unit. Feel the switch to see if it 'rocks' back and forth with a bit of pressure. If it moves easily the switch may be bad. If you ...
Usually answered in minutes!
1,392 Questions
801 Questions
725 Questions
572 Questions
453 Questions
