Questions & Answers for: symmons

Question about Symmons Deluxe Temptrol pressure balancing mixing valve with white insert h

1 Answer

Water not hot at the Symmons Safety Mix valve. Had plenty of hot water before I installed a new hot water heater. Now, it's not as hot. I turned up the temperature to about 130 degrees. Sometimes it ...

Ad

Question about Symmons Temptrol pressure balancing mixing valve with lever handle, integra

1 Answer

soon as i turn on the valve i get hot water .can't get just cold water. symmons temptrol yes but you have to find the main lines going into your shower and switch them, just tell your guest a head of ...

Ad

Question about Symmons Temptrol pressure balancing mixing valve with lever handle, integra

1 Answer

i am attempting to replace a Symmons shower stem and washers. I have the trim removed and I am looking at what I think is the T-11 nut. It says to turn it counterclock wise. But, I can't budge it and ...

Question about Symmons Temptrol pressure balancing mixing valve with lever handle, integra

1 Answer

We installed low flow shower heads on a symmons temptrol system and now the showers do not get hot and the temperature flustuates. You might want to change out to a different model. The highsierra ...

Question about Symmons Safetymix Visu Temp shower unit with hand shower, shower head, and

1 Answer

I am trying to service a symmons Safetymix Visu-temp 4-500VT/ It only gets tepid water temp. I have not worked on one of these before, So am not familiar With the breakdown or servicing. Can you tell ...

Question about Symmons Temptrol pressure balancing mixing valve with lever handle, integra

1 Answer

i have a symmons shower that has barely any hot water and barely any pressure on the hot side? Chances are it is a simple blockage.. at least that is the first place to check. In some cases simply ...

Question about Symmons Temptrol pressure balancing mixing valve with integral volume contr

1 Answer

How do you internally adjust the hot water setting of a Symmons pressure balancing mixing valve? To set the shower valve handle limit stop, remove the screw holding on to the handle and remove the ...

Question about Symmons Temptrol pressure balancing mixing valve with lever handle, integra

1 Answer

symmons temtrol type A only leaks when water is being used and leaks in the wall. what do i need to do? If it leaks only when used, the leak is coming from the the lines running to the shower head or ...

Question about Symmons Temptrol pressure balancing mixing valve with lever handle, integra

1 Answer

Maytag Maxima washer error codes E01 F08 Error codes E01 E08 Mine was resolved after changing the Symmons slide valve at the inlet to the hoses. This valve is spring loaded and does not work if not ...

Question about Symmons Temptrol pressure balancing mixing valve with lever handle, integra

2 Answers

The flow of cold water is extremely low after replacing the Symmons mixing valve? We have replaced the hot and cold seats as well as the cartridge (mixing valve). When all parts are removed, we have ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Home Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

73781 Answers

Brad Brown

Level 3 Expert

19190 Answers

john h

Level 3 Expert

29497 Answers

Are you a Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...