Questions & Answers for: tech reverse forward Boating

Tech Solution TS 8000 only works in reverse. I a have made sure no peper is stuck in it... and I carefully wiped the sensor with a dust cloth? ANy suggestions? Hi, Did you check out this thread? http:

reverse and needs a good service to free it off. It is very difficult trying to diagnose the problem without looking at the machine. A reasonable sewing machine tech should be able to sort the problem

...reverse speed needs to be increased turn the dial up,but don`t forget this also increases forwards. Sometimes the engager (the gas knob or the go switch) gets a bad spot. When you start backing up ...

...reverse! Is there a simple fix for this problem? No, the controller must be reprogrammed and you will need an Invacare service tech to bring his hand-held programmer over to make the corrections to ...

...reverse with the speed pot not being changed but not forward. when you are just changing the position of the throttle to forward thereby changing the pot wiper and getting the error. Contact Pride ...

Reverse works but forward will not engage. Your problem is within the "switch" if you can only use it in reverse. Unfortunately, no parts are available for that "discontinued" model. Best answer is to

...tech drive. I was wondering if you could help me diagnose my problem. I have a g4, and the forward drive works, but has little or no power to propel the machine forward. the reverse works normally. I ...

...reverse. What does this mean As it says, the body computer finds a problem with the gearbox.  Could be an electrical problem or mechanical problem in the transmission.A tech would scan the body ...

...forward creep from the tractor. I either have to hit the reverse pedal or the brake to stop it. The reverse pedal works fine. http://www.tractorbynet.com/forums/john-deere ...

I have a 1996 Chevy 1500 truck with forward gears but no reverse ? Reverse clutch operation has failed. May be fixed through removal of pan. Best left to trained tech.