Questions & Answers for: temptrol

Our shower does not produce hot water. How do I know if the mixing valve is the problem? check the anti scold setting if new install is shipped set in cold position if paperwork available will explain

turn on get some hot water but not enough there is an adjustable stop screw to adjust how far handle turns this prevents scalding.

Only hammers when I shout Out the 2nd floor shower. I have a symmons temptrol shower valve It sounds like you have a problem called water hammer. When you shut off a fixture the pipes vibrate loudly ...

soon as i turn on the valve i get hot water .can't get just cold water. symmons temptrol yes but you have to find the main lines going into your shower and switch them, just tell your guest a head of ...

Low shower pressure Is there a water saving feature/washer ?Was there good pressure before ?Is there an adjustment at the control valve for how much hot/cold water is being balanced ?Any debris stuck ...

water not warm enough comming from shower. Very hot comming from tap. I think it is a problem with the mixer unit in the shower Replace your Tempering valve cartridge. Should do the trick. This will ...

We installed low flow shower heads on a symmons temptrol system and now the showers do not get hot and the temperature flustuates. You might want to change out to a different model. The highsierra ...

tub faucet leaks the faucet leaks do you mean drips or leaks...try and replace the main cartridge to unit...turn off water pull out cartridge and go to plumbing supply store and match up...make sure ...

kohler shower valve trim on temptrol mixing valve We've got this Temptrol 2000 pressure balancing valve in the wall, and don't want to replace it (which would mean cutting away the ...

No shower hot water does the handle rotate from cold to hot....if it does not seem to go all the way to hot it could have a set limiter under handle that has to be reset so handle will rotate to hot..