Questions & Answers for: Gateway third monitor Computers & Internet

...monitor only comes on for a few seconds and then goes blank. I have to have a way to get EzTune software that works. Gateway will not tell me how. Whatever you do - DON'T CONTACT GATEWAY. I am in the ...

third monitor I have repaired in the last six months, and each one needed one or two capacitors to fix a dark back-light problem. Same problem, logo on powerup and a few seconds of display then BLACK.

Monitor will sometimes show graphics, other times will say no signal found or be totally black. I've tried 2 different monitors, and same problem with both. Either way, it appears as though whatever ...

...monitor will come back on, and you will also have the TV screen. 4. On a third click you will kill the TV display and end up where you started, with the display on the Computer Monitor only.. Kindly, ...

...monitor cable running back to Desktop, What I would like to do it identify the faulty component and replace it. Most common parts that go bad are rge DC filter caps in the power supply and in the ...

...MONITOR The left one third of my monitor is blank,everything is pushed to the right. how can i correct this? Are you using video resolution 1440 X 900? Have you tried "auto adjust"? Monitor ...

...monitor screen will not come up with the computer it turns on but will not boot up. The model number is fpd2185w The problem is more often than not cause by the processor failure. But check the VGA ...

...monitor and press the function button followed by the appropriate F key to switch between internal and external screens (normally F5 or F8 which ever the key could be marked with a screen icon. Three ...

third time I,m trying to get an answewr to this problem . I followed the sugestion the first time and it didn,t work. Let's try again. I have a gateway computer in the upper right corner in a grey box

...third less cost. Hello, First, try disconnecting and reconnecting the monitor cable at both ends (pc and monitor). If this doesn't help, the power or inverter board are probably bad. Check with the ...