...transfer belt ( one message say it has 98 % life remaining) ( while the message says install new belt) Swith off the machine before installing new units. Also check for toner dust on pins and also ...
life. Select the transfer roller/ozone filter button and press the C key on the keypad. It should zero the life count. Now press end, exit etc until you back at the copy screen. Warning: Please do not
...life Hello, The transfer unit on my Epson C-900 is out of service life. A newer one is very expensive and I´m searching for an idea to reset the unit´s counter now. I think, this unit has enough ...
Question about C522n Laser Printer
life. There is no way to reset this chip, you simply have to replace the transfer belt, and the machine prompts you for the internal reset at that point. Sorry I could not be more help. I have several
Question about WorkCentre M24 All-In-One Laser Printer
...One of your drums may just need replaced. Of the fuser life has reached its end, the transfer belt or cleaner may have reached end of life. That is the most likely reason you can scan and not
...There must be a consumables supplies that need to be replace. ie, transfer belt, transfer roller, developer, or toner. If one those units reach the life cycle it will give that messages to replace. ...
Transfer Life Low Error on Xerox Phaser 6180 We have a message on our printer that says the transfer life is low. Where is this on the printer and where do we get a replacement? That error is caused ...
...life expectancy of the 6180 I'm trying to figure out whether to replace the fuser or replace the printer. What's the lifespan of the machine? a new fuser should be a lot cheaper than a new printer ...
then counters -life-new release open the front door select the transfer belt and press start that tells the copier new transfer belt. Recommend a tech do it. Unless you know how to enetr service mode
Question about Phaser 6180N Laser Printer
...be there you can ret it wait 30 seconds and turn the machine off and back on. These transfer belts have a life of 60k and should be replaced as it can degrade the drum and developer if not
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,161 Questions
2,149 Questions
1,912 Questions
