Questions & Answers for: can i unplug the scanner Computers & Internet

...10 mins. Unplug scanner. Restart pc, plug back scanner. Restart PC and check if it works. If it doesn't start you may need to reinstall drivers . Driver from Canon site Driver from other site ...

...unplugging the power. See if the lamp lights up. Check your ac adaptor to make sure it is getting power to it. If you unplug your USB cable and plug it back in, that can trip the scanner lamp as

unplug scanner, turn off mac, remove mac battery and unplug adapter, plug everything back , restart and reconnect. If that did not work, then do the following: Unplug scanner usb and reinstall scanner

...scanner. we use it to scan xrays in our pediatric dental office. this morning it just won't power on. i've done everything. unplug - leave unplugged - reset the surge power strip - change outlets - ...

HELP! My HP Scanjet5470C worked PERFECTLY - not anymore I unplugged my computer system & moved it into another room of my home. Now my computer won't even recognize it and my scanner won't even turn ...

...unplug the scanner's power ,you must also disconnect the USB cable from the computer. To resume use of the scanner, remove the power card, the the USB cable. Sounds like a lot but the order is ...

...the computer. How could I solve this problem? Thank You, Oli. Unplug your scanner, reinstall the drivers from the scanner disk, restart your computer plug your scanner back in and it should work

...a power surge try to unplug it and directly plug it in to the wall. You should notice the light on the scanner. If it is not litting up, you need to have the scanner serviced due to defective ...

...scanner itself. Then unplug the power cord from the wall for the scanner. Wait about 20-30 seconds, then plug the scanner back into the wall. Now plug the cable in to the scanner, then the computer. ...

...is plugged in dies when unplugged with scanner it will run ok wide rpm range although some stuttering unplug scanner it dies Bad or loose ground wiring. Check ground by driver side intake ...