Questions & Answers for: vms

Recognising floppy disk drive type on DS10 I have loaded VMS 7.3 on DS10, I entered command "show device/ful dva0" , vms say its a RX26, however the label on drive unit says RX23. I cannot initialise ...

change number of rings on incoming call before it goes to VMS we are using partner mail vs release 5. Currently its set to go to the voice mail after 4 rings. We would like to change it to 2 rings. we

...feature 00 left intercom left intercom Then the program for the ring delay on the Lines: VMS Hunt Delay Dial #506 Release 2.0 and earlier: Dial 1=Immediate 2=Delayed Release 3.0 and later: ...

...4th ring. How do I change it to pick up on the 8th ring? I don't think its a good idea to back the vms cover rings to 8. The furthest I'd go is maybe 6. Changing the VMS cover rings on a Partner ...

setup vms dcps print queue for a xerox phaser 8500 -can't do pcl what's the proper way to setup a vms dcps print queue for a xerox phaser 8500. My queue works except when I want to print files that ...

...it keeps picking up after 3 or 4, how do we fix this? The place to set rings to answer is # 506 (VMS hunt delay)selecting either 1 for the day schule or 2 for the night schedule. You'll also want ...

...to the extension that transferred the call to the new extension is probably because the cover vms isn't set up for the new extension. To check the vms cover for that extension, at either ...

Need a manual for VWR VMS-C7 hot plate thanks! Need a manual or instruction or operating instructions for model VMS-C7 pf VWR Hotplate and stirrers. Thanks! ...

...on in the COS. Someone will need to access the voice mail through the LAN interface and access the VMS GUI to manipulate the COS to turn off the Outbound Transfer in COS 1. This is a known issue on ...

..."Drivers and Software" then "Microscopes" then "VMS-004 400x USB Microscope". There are zip files for two versions: first download the pdf that ...