Konica Minolta Dialta Di3010 3010f 3510 3510f Toner 2 Ctgs per Ctn 28 000 Yield Type 303A "printer displaying tray" Questions

...printer control console that indicates which output tray is full. • In automatic switching mode, the system automatically switches over to the second tray (if it is empty) when one tray is full ...

...Tray 2. So, how do we change the printer so that it automatically selects Tray 2 and prints? Thanks Ry The tray 1 is same as manual tray, it opens in front of you. normally (in windows) you need to ...

...jam open input trays display is saying "13.2 paper jam open input trays then open and close top cover" Check for any paper jam in the tray and restart the printer and put it caliberate ...

...paper My DCP-7030 brother machine is not working with tray, it display jammed paper pls suggest. rgds machine tray will be clean .Printer fuser parts clean.plz tell me my cell no. 08273174139 ...

...tray 2 in HP Laserjet p3005n printer HP printers will default to the highest numbered tray that contains plain letter paper. So on a standard 3005 Tray 2 is the default unless you have the paper type ...

...printer. I had the paper tray on when I turned the power on. It displayed an error: " Inner cover is open. Close the inner cover and press OK." I closed the tray and press OK, it still displays the ...

M20/Ms0i WorkCentre display "Paper Size Mismatch" the settings on the print driver and the machine do not match. ress the [Machine Status] button on the Control Panel. 'Machine Setup' will be ...

...disabled and the printer re-booted. had the same problem: took the tray away and found a sheet of paper in the printer not alawing the tray sensor to work properly!!! after that the prob was

...printer. Have checked all paper settings and tray settings.Changed paper pick up rollers also. Hi This error means that the media in tray XX doesn't meet the specified standard of the tray. The ...

...tray 1, printer beeps and displays message "8 1/2 x 11 Change Setting Tray 1". Only way to work around is to send to bypass tray. Could it be a faulty sensor on the tray itself? Don't be mad, but it ...