Questions & Answers for: command 86

...amperage varies more than 0.16 amps from command amperage" and # 86 =Low Ratio, and this one has no definition. and they are listed under 96 disel W/4L80E and 94 gasW/4L60E.Well hope this

fractions why i canot do fractins on my t-86 caculator Use the >Frac command in the MATH MISC menu to convert a value to a fraction.

Not sure on how to get a decimal into a fraction on the TI 86 The >Frac command on the second page of the the MATH/Misc menu will display the current value as a fraction.

0.32 repeation decimal into a fraction You can convert a decimal value to a fraction by using the >FRAC command in the MATH MISC menu. Be aware that this command will not work on all values.

...86 - how do i change a decimal to a fraction? Use the >Frac command from the MATH MISC menu. Press 2nd [MATH] to bring up the MATH menu, Press F5 for MISC. Press MORE for the second page. Press F1 ...

solve the problem error 15 memory From the manual: "Memory is insufficient to perform the desired command; you must delete items from memory before executing this command." Either your arrays and/or ...

How do you change a decimal into a fraction using the ti-86 calculator? Use the value>Frac command in the MATH MISC menu. Press 2nd [MATH] F5 NEXT to see it.

how do I reduce fractions on my TI 86 Enter the numerator, press the divide key, enter the denominator, press the ENTER key, then press 2nd [MATH] F5 NEXT F1 (to select the >Frac command).

...command starter signal small wire at starter look at the relay youll see numbers at the legs side 30 87 are your contacts 85 86 are the relay coil make sure all contacts are clean when car wont start ...