...error has occurred communicating with the device. Make sure that the device's power cord and cable are properly attached and plugged in. Refer to HP service and support on the web for more help with ...
Question about PSC 1350 All-In-One Thermal Printer
...error code and scanner switched off etc. message. Printing from PC works OK. i found this while i had the same error msg... apparently its actully the USB cable where its does not suffice here is the ...
...error occured communicating with the scanning device''. The buttons on the scanner itself do the same thing. Scanning Without HP Hardware 1. Click Start 2. Control Panel 3. Click Scanners and Cameras ...
Question about PSC 1401 All-In-One Printer
...error occurred communicating with the scanning device. Please ensure that the scanning device is connedcted properly and try again" which I did and still I get this message. Can you please help!! Hai ...
Question about PSC 2355 All-In-One InkJet Printer
...tests to verify the defect..replace USB/parallel cable first..see if it still occurred..Communication is from scanner to PC.. See if it can help.. mastergani Error communicating with scanning ...
...error occured communicating with the scanning device. Please endure that the scanning device is connected properly and try again. Restart the PC and the scanner and try again. Make sure you installed ...
ERROR E046 CANON SCANNER E046 Main drive PCB (Controller CPU judgment) If a communication error occurs between the motor or sensor and PCB, an error message appears. If it appears, reset the main body
estudio232 error C550 an error of C550 how to fix it RADF I/F error: Communication error has occurred between the RADF and the scanner.
...error Solutions : Remedy 1. Check the Laser Scanner Unit connector. 2. Replace the Laser Scanner Unit. 3. Replace the DC Controller PCB (PCB1). These errors generally occur in every printer. I have ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,161 Questions
2,149 Questions
1,912 Questions
