Questions & Answers for: exmark engine problem

...Exmark with a 23 HP Vanguard engine (~70 hours on the engine). I've not been too pleased with Briggs (have one on my John Deere garden tractor - hot natured and backfires/sputters). Is the Briggs ...

exmark 19.5 Lazer Z Misfires when you engage the PTO Engine misfires when you engage the PTO then after a frew it runs fine heck the spark plugs for carbon build up 

I have a exmark 23 hp 680 volt kawasawkinengine and it clicks but will not start if electric start could be the starter solenoid or flat battery try jump start maybe first

Exmark 44 Mower bogs down going forward When you say 'going forwaed', is that while mowing or does it do it without the blades engaged or 'not mowing'?

...exmark zero turn with a 23 hp kawasaki engine. Engine works fine. The problem is that this morning when I wanted to mow the wheels won't engage when I push/pull the steering rods. Fluids seem to be ...

...exmark walk behind with the 0 degree turning system and it powers down when i turn right, how do i fix it? you mean it dies or the engine slows down ??? Oil level sensor (checl oil level)or fuel ...

Can't get exmark mower with Kawasaki motor to start Can't get my exmark mower to start. Cleaned the carb, has good spark. Took the air filter off so it's getting good air and have poured a few ...

why exmark loses power when blades are turned on Check for clogged deck.also inspection of mower deck belt. Check for glazing or cracks in belt. That will slow blades down. Balance the blades and make

safety switch on brake handlechecks ok but motor cuts off when released engine runs but cuts off when brake is released check clutch safty switch or seat safty got to be one of those switches

the egine runs to fast wih a touch the throttle,what causes that/ does the engine idle when throttling down,if not you may have a worn governor or incorrect spring and or linkage settings.