Questions & Answers for: f7431

Permanant water flow I have a Hoover F7431-900 with a problem. It continues to put out solution in forward and backward mode no matter what setting it is on. Even when it is on and locked in the ...

hoover F5815 Steam Vac Hi - No steam. Just weak H20 drizzle. Thanks Won't be any steam, just the hot water that you put into the tank.

Spin brushes on Steam Vac Hi I need to know how to remove the cover on my dual v steam vac f7431-900 hoover so I can check to see if there is a belt not working or if the brush switch is broken. The ...

F7431-900 HOOVER STEAM VAC Brushes stopped moving. Put screwdriver in where brush shaft goes to see if it spins. It does not. I was told probably a bad turbine. I can not get the top cover off. I ...

hoover steamvac f7431-900 Brushes do not spin. From what I read it sounds like a bad turbine. My problem is I can not get to it. I removed all the screws I can see but can't get the top cover off. It ...

...Im looking for directions on how to replace my brush turbine on my Hoover SteamVac Dual V F7431-900. My brushes stopped spinning and I believe this is the problem. Thanks first you must ...

Hoover SpinBrush Model F7431-900 Brushes will not spin You have either stretched or broken the belt that drives the beater bar. Replace the belt. Jim.

brushes wont turn on hoover steam vac f7431-900 need replaced TURBINE AND GEAR ASY part no: 91001097 Horrible engineering with this turbine that failed just after 5 uses.

...the valve. You can find all the parts you need click the link below. Please give positive feedback. F7431 Parts Link ...

how do you get the tank valves out of Hoover F7431-900? Does it take a special tool? pull down firmly on valves they will come out (soap or water side) then firmly push new valve in. By design valves ...