Questions & Answers for: ic 8002

...on the front there is a button to do this automatically, this does help. I've got staggerd colors, how do I manuly adjust the convergence using the remote? stk-392-560 ic 8001 &8002 on d ...

...ic-8002 ic 6501 both are mcz3001D IC's they cost 5.50 each. Have a proffesional that can do soldering to the board and your fine. If not take it to a technician to replace the IC's on the dboard that ...

...that is located on the power supply board. replacing the power board in this unit will fix this issue. IC 8002 is your problem. This is a common failure for these sets. The IC is located on the D ...

...IC 8002 is the problem with your TV. Sometimes you can get the set running by unplugging it for a few minutes, or just try powering it up every so often. Once it is on it will stay on. You can leave ...

...IC 8002 is no good that is MCZ 3001D. carefully de-solder and take IC out. recommend use 18 pin ic socket, so u can push new IC in instead of soldering- fast and easy. do it ur self save $300.

have 6 flashes from stand by light, no sound, no picture, unplugging set doesn't reset the unit anylonger Replace ic 8001 and ic 8002 on d-board,Part# mcz3001d for both

sony wega crt tv wont turn on red light flashes 7 times thats it The horizontal deflection has stopped could be Ic 8002 and related components or flyback and related components.

...and no turn on, someone have solucion, thanks Model Kp-57wv600 most common issue for six blinks is a ic on the power supply board location is ic 8002 replace with sony original should fix your ...

...IC 8002 ( MCZ3001DB ) to no avail. this is a high voltage shutdown.......the high voltage has exceeded 33k,.....it causes the unit to shutdown for safety.check the power regulation as well as ...

...sony tv 43ً double photo for projection sony tv 43ً Replace both of your STK ICs STK392-110s use 150s Mats has Them 1-800-628-1118 All DLP tvs have this problems known as a ...