reset the drum unit dr 360? Thanks, Sergio email:bulktoner@yahoo.com 1. The Drum LED blinks if the drum unit is near the end of its life. Use the drum unit until you have a print quality problem, then
Question about C5100 Laser Printer
reset the drum units on the Okidata c5100, first time reset Can I reset the drum units on the Okidata C5100? They have never been reset..I just bought compatable toner cartridges, but I get an error,
...drum unit Reset DCP 7030 drum unit : -LCD- Press MENU and turn on printer - MAINTENANCE arrows 81 and OK -RESET DRUM COUNT press OK -RESET LIFE COUNT press CLEAR / BACK arrows 99 and OK ready drum ...
...drum. To reset the drum follow the instructions below: Open the front cover of the printer. Press and hold down Go button for about 4 seconds until al the LEDs light up. Once all 4 LEDs are lit, ...
...reset the drum unit count. To do so: Press the Menu button, and then enter the number 84 to access the Reset Menu. Press the scroll keys until Drum is displayed and press OK. Drum unit will ...
drum and reset the counter (Essentially the cartridge/drum unit should not be in the printer when you reset it) 1) Open front door 2) Remove the cartridge/drum unit 3) Hold down front button until all
...reset the drum counter via the printers control panel. 5.Make sure that the machine is turned on. 6.Press C / Return (?) Clear / Back. 7. To confirm you are installing a new drum, press ?. 8.When the ...
Question about KX-MC6020 All-In-One Laser Printer
...reset the drum supply how do i go about it On this specific unit, the drum actually has a small resister on the back of the drum unit that resets the machine when a new drum unit is installed. Your ...
Question about MFC-7860DW Laser All-In-One
...reset drum Time to really order a new drum and really replace with a new one. Resetting the drum unit will not improve print quality. It only resets your drum and allows you to continue to print. You ...
Question about MFC-8860DN Printer
...reset the drum counter as instructed below. 5.Make sure that the machine is turned on. For MFC users: To confirm you are installing a new drum, press 1. For DCP users To confirm you are installing a ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,161 Questions
2,149 Questions
1,912 Questions
