...on the smaller mirror to offset any misalignments on the screen itself. It may use a allen wrench possibly. sometimes a phillips screwdriver also. Let me know if this helped you . Thank you
...offset and overlapping, and the middle of the tv is bowing towards the middle, top and bottom... makes it compeletly unwatchable.... You need to re-solder the circuit board that contains the STK ...
Question about F27440 27" TV
...offset low output from aging CRT) can appear to unfocus your screen. Adjust color/contrast down if they are maxed out or close to highest setting/pot level. 2. A very likely culprit is unshielded ...
...offset and it looks like something is pulling the center top and bottom of the screen togeather(2 arches one at the top and one at the bottom)kinda like as if someone was pushing on the center of the ...
...offset from the screen and has a red and pink glow around the picture. I also need to know how to re-align the projectors. go into the menu find convergence some models have auto convergence if you ...
screen stays lit up and black. any clues what might be the cause of this, i've got it torn apart, and nothing looks burnt, but maybe im looking in the wrong spot, any help would be appreciated. Theres
Screen picture offset The picture on my screen has gone off balance the middle of picture at top of screen looks like its tiopping back and that the picture looks 3dish kinda oval were the focus isnt ...
Question about D52W20 52" Rear Projection HDTV-Ready Television
...offset screen and has to warm up before it will go back to normal screen. This is caused by convergence. One of the convergence ICs (integrated circuits) is temperature sensitive. The parts will need ...
Question about P52921 52" Rear Projection Television
...screen but has a curve on image and colors are offset. What did I do or what can be done Ur tv have a problems known as a convergence problems,it dead.The tv convergence board require the 2 STK ...
...offset far to the left, leaving big black bars on each side. my remotes no longer are able to move the screen manually. I tried to unplug the tv for several hours to reset it and it didn't work ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
