Questions & Answers for: xorg

...stylus c60....and its printing page after page of garbage...ig/Height d/Width~d/fEOFill~d/yOrg~d/xOrg~d/PaintData~d/ooutpurBPP~d just re-install your printer driver to fix the ...

...something about HorizSync and VertRefresh. Next open the terminal: Code: sudo gedit /etc/X11/xorg.conf Go to the Section "Monitor" and add the correct HorizSync and HorizSync CAUTION: Make

...in System Configuration, Peripherals, Touch Pad and be sure to click "Apply". You can modify the xorg.conf file as follows, As root edit: /etc/X11/xorg.conf In the touchpad stanza add the

Analog - Out of Range.....going to higher video res After modifying xorg.conf file to increase video resolution (1440x900) the monitor goes black and displays: ANALOG OUT OF RANGE 80.8 KHz 65 Hz After

...on touch pad on setting it says gsynaptics couldn't initialize. you have to set shmconfig true in xorg.conf or xf86config to use gsynaptics. and i have no idea wat that means plz someone help Are ...

...is connected! I switched to EEEbuntu 3, instead of the Linux that comes with it, and the default xorg.conf file made it so when I right click on the EEE PC tray icon, it always said the touchpad ...

...75Hz (or something nice). Try that. In Linux (under Xwindows), you'll need to look at the /etc/X11/xorg.conf (if using that) and change the section for the monitor to include the limits as shown ...

...Install the drivers for your graphics chip sudo apt-get install xserver-xorg-video-intel. ust to ensure it didn't get removed by mistake (very slim possibility), just run ...

...there is no additional driver to download it gets a bit tricky. You will need to edit your /etc/X11/xorg.conf file. The file will look someting like this: Section "Monitor" Identifier "Philips ...

...unless you are using a proprietary driver. If you have a proprietary driver, the file /etc/X11/xorg.conf is still