Viking Air Tools & Compressors - Recent Questions, Troubleshooting & Support
I do not like it when I get connected to this
Hi,
Actually you get many tips from this website :
http://vikingdrill.com/Drill_Troubleshoot_Face.html
Below is Troubleshoot sample availabe in this web :
If you have problem with broken Drill because flutes clogged with chips, drill binds in hole (Common in deep holes) then solution are :
- Use a drill with wider flutes and/ or faster helix angle
- Consider polished flutes
- Withdraw drill at regular intervals to clear chips
- If chips are not broken up, consider heavier feeds - or a chip breaker design.
You can take tour through the list to solve your appliance problem
Or you describe your problem here,
Thank you,
Spray gun support
Daily clean-up all parts with proper cleaners/solvents. Re-lubricate where lubricant is washed away by cleaning. Moisture traps and compressor tanks must be drained daily.
Thiner how to
Paint to thinner ratio is 60:40, that is 60% paint and 40% thinner. Sometimes it can be 50:50 depending on different occasion. Remember to MIX IT WELL.
Hello, I am using a Detective Special Cap Gun and
Hello, I'm using a Detective Special Cap Gun, but the trigger isn't working properly. It feels loose and doesn't activate the hammer or magazine. Instead, pulling the trigger moves the magazine up and opens the cap gun. I would greatly appreciate any advice you may be able to provide regarding how to resolve this issue. Thank you!
Not finding what you are looking for?
