Questions & Answers for: split tv dish network

Question about SPN4235 42 in. Plasma HDTV

1 Answer

...tv's amp is burning out? What could be causing this? My set started having sound issues recently. Every now and then, randomly, I get a split second, static sound. It sounds like an old record player ...

Ad

Question about DISH Network(r) 311 Satellite System

1 Answer

...a splitter to serve BOTH cable outlets? you need to split the line at the receiver box. The signal from the Dish needs 18vdc to the receiver or you'll get NADA.. If I understand you

Ad

...the inputs on the back of the 322 box is bad. usaly 1 wire runs from the dish into a seperator that splits the signal into 2 at the back of the box. you will need to call dish and have a new 322 sent ...

...split the signal with a 900mgz splitter between the living room and other room. if your pic is fuzzy you have a bad splitter or bad cable, try replacing these one at a time and it should clear up. If ...

Question about ViP 612

1 Answer

split for two tvs. Hey! This is Becki Barned, with Dish Network customer service!!! You may have already gotten this taken care of, but either way, here are some steps if you still need some help! How

Question about AVR-687

1 Answer

...tv and my screen keep splitting in half when we are watch it. Well, you didn't offer a whole lote of info, so I imagine that is why responses have been slow.  It isn't clear at all to me ...

...dish connection. TV only has a single co-ax input Hi, Go to Radio shack store and get a cable signal splitter. Its a small device that splits 1 line into 2 or 3, so that you can run more players or ...

Question about ViP622 DVR DTV Receiver / 180-Hours Video Recorder

1 Answer

split the signal from TV1 if it is connected via a coax cable. All you would have to do is run that TV1 connection into a 2-way splitter, then run a connection from each of the ports to a different TV

Question about Dish Network Dish 500 Antenna Satellite Package with Pansat 4500 FTA Reciever - D4500

2 Answers

...split. TV 2 (the location with no receiver) is on the wrong channel and is viewing the content intended for TV1. From the TV1 location, hit menu, 6, 1, 5. The modulation screen will show what channel ...

Question about Dish Network Dish 500 Antenna Satellite Package with Pansat 4500 FTA Reciever - D4500

2 Answers

...TV is at 100 and will not turn down how do I fix this go to your settings, it should be under fixed or variable volume. Split a 65" Samsung LED and a 24" Samsung LED on two Fight Nights off of Dish ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

73783 Answers

Larry

Level 3 Expert

5043 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

42221 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...